Skip to content
On-Site Power Advisor
0
  • Home
  • About Us
    • Submit Feedback
  • Design Advisory Services
  • Store
  • Sign Up!
  • Support
  • 0

Case Studies

Improving the Efficiency of District Heating & Cooling Systems

May 4, 2020April 22, 2015 by David Hurtado
pipe installation

District heating and cooling? I know, I know. This subject goes a bit outside of the on-site power theme of this website but, being Earth Day today, I thought it would be good to share this information with my readers in the field of mechanical engineering. So here it is…

Categories Case Studies, General Tags chilled water, hot water, piping, sustainability Leave a comment

Follow Us!

Follow Us on TwitterFollow Us on LinkedInFollow Us on RSSFollow Us on E-mail

Categories

  • Case Studies (1)
  • Code Compliance (15)
  • FAQ's (29)
  • General (49)
  • Product Reviews (8)
  • Tools (6)
  • Tutorials (16)

Tags

aftercooler automatic transfer switch battery charger charge-air cooling day tank diesel fuel emissions engine data engineering engine exhaust EPA facility fuel systems fault current fire pump fuel fuel fill station fuel overflow fuelport fuel quality fuel recirculation fuel tank generator testing glossary grounding leak detection load bank NEC NFPA-20 NFPA-37 NFPA-110 noise attenuation piping radiator RICE NESHAP separately derived silencer simplex smartpump specification aid survey terminology UL-142 wet stacking withstand rating

From our clients!

David has been an excellent asset for Fuel Oil system design. I am extremely grateful for all of his help!

Joshua Rose   

I was very impressed the first time I dealt with David. I was recommended to David’s company by our Cummins sales representative, and David helped me thru my first fuel delivery system project for a Florida Assisted Living Facility. He does not just send general cut sheets of systems, … but details such as pump HP values, cables sizes, fuel piping sizes, sensor requirements, etc. I would recommend him highly to anyone struggling with fuel system design.

Gary Wall, PE, LEED   

I was introduced to David by a coworker who insisted I speak with him for a fuel project design. It has been the best advice given to me. David is a fountain of knowledge and is more than willing to help and provide service. He has been an invaluable source of information for me.

Ricardo Martinez   

I am writing just to highlight the great service and support I have always received from David Hurtado. His support has always been there in a technically sound base and in prompt manner.

From a consultant point of view his work has been exceptional. Have a great day…

Luis Silvestre   

I am a novice on fuel systems and needed help with a detail, David jumped in and gave me direction and assistance. Thanks David

Jeff Hawkins   

I recently completed a fuel oil system design associated with (2) 2.5 MW emergency standby generators and worked closely with David for equipment design support associated with bulk storage tanks, day tanks, pump skids, filtration skids, fueling ports and controls. It was the first time that I worked with David and found the experience to be nothing short of excellent. I appreciated David's expertise and advice provided in selecting equipment and drilling down into details. David was always very responsive and went out of his way to make sure I had everything needed to complete my work and to answer all my questions during and after business hours. It's nice to work with folks that understand the equipment they represent and have a passion for the finer details. David has an excellent understanding of the equipment and was very enjoyable to work with. I look forward to working with David on our next project.

Vincent Vitale PE   

© 2021 On-Site Power Advisor | Terms of Use | Privacy | Log In
Scroll back to top